SUMITOMO DLF150TB328N23 injector bearing Size Chart (mm/inches) |
|---|
| d | 17 mm |
| D | 35 mm |
| B | 10 mm |
| d1 | 22.6 mm |
| d2 | 22.6 mm |
| D1 | 29.3 mm |
| K | 0.5 mm |
| C1 | 6.05 mm |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.2 mm |
| a | 11.2 mm |
| da min. | 19 mm |
| db min. | 19 mm |
| Da max. | 33 mm |
| Db max. | 33.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.2 mm |
| dn | 23.7 mm |
| Basic dynamic load rating C | 6.5 kN |
| Basic static load rating C0 | 3.1 kN |
| Fatigue load limit Pu | 0.132 kN |
| Attainable speed for grease lubrication | 56000 r/min |
| Attainable speed for oil-air lubrication | 85000 r/min |
| Ball diameter Dw | 5.556 mm |
| Number of balls z | 12 |
| Reference grease quantity Gref | 0.54 cm³ |
| Preload class A GA | 40 N |
| Static axial stiffness, preload class A | 53 N/µm |
| Preload class B GB | 80 N |
| Static axial stiffness, preload class B | 69 N/µm |
| Preload class C GC | 160 N |
| Static axial stiffness, preload class C | 90 N/µm |
| Preload class D GD | 320 N |
| Static axial stiffness, preload class D | 118 N/µm |
| Calculation factor f | 1.04 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.02 |
| Calculation factor f2C | 1.05 |
| Calculation factor f2D | 1.08 |
| Calculation factor fHC | 1.02 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.033 kg |